須知當使用電動工具時,基本的預防措施,包括以下幾條,應該一直遵循說明以減少火災,觸電和人員傷害事故的風險.在使用本產品之前,請通讀須知,并將其妥善保存.為了操作：

　　When using electric tools, basic safety precautions, including the following, should always be followed to reduce the risk of fire, electric shock, and personal injury accidents. Before using this product, please read the safety instructions carefully and store them properly. For safe operation:

　　1) 保持工作地點整潔保持工作環境清潔，并且有充足的光亮，混亂的工作區域和工作臺容易導致人員受傷。

　　1) Keep the workplace clean and tidy, with sufficient lighting. Chaotic work areas and workbenches can easily lead to personal injury.

　　2) 重視工作場所的環境不要將電動工具暴露于雨水中，不要在潮濕和多雨的場所使用電動工具，不要在有引起火災或爆炸等風險的地方使用電動工具。

　　2) Pay attention to the workplace environment and do not expose power tools to rainwater. Do not use power tools in damp and rainy places, and do not use power tools in areas with risks of fire or explosion.

　　3) 避免觸電工作時避免身體直接接觸土地以及接地的導電物體。4) 遠離兒童不要讓參觀者觸摸工具和延伸絕緣電線，一律禁止閑人進入工作場所。

　　3) Avoid direct contact with the ground and grounded conductive objects during work to prevent electric shock. 4) Keep away from children and do not allow visitors to touch tools and extended insulated wires. Unauthorized individuals are strictly prohibited from entering the workplace.

　　5) 閑置工具貯藏當電動工具不用時，工具應該儲存在干燥的高處、兒童找不到的地方。

　　5) When electric tools are not in use, they should be stored in a dry, high place where children cannot find them.

　　6) 不要勉強使用工具在工具的適用范圍內使用工具，才能獲得良好的效果和。

　　6) Do not force yourself to use tools within their scope of application in order to achieve good results and safety.

　　7) 使用正確的工具不要強迫小型的工具和附屬品去完成一個重型工具的工作，不要用工具完成預期外的目的。

　　7) Do not force small tools and accessories to complete the work of a heavy tool, and do not use tools to achieve unexpected goals.

　　8) 適當著裝不可穿寬松的衣服或戴首飾進行工作，因?yàn)榭赡鼙桓咚傩D(zhuǎn)的部件纏住而發生意外，當在室外工作時，建議配備橡膠手套和防滑膠鞋，戴保護頭盔包住長發。

　　8) Wear appropriate clothing and avoid loose fitting clothes or jewelry when working, as accidents may occur due to entanglement with high-speed rotating parts. When working outdoors, it is recommended to wear rubber gloves and non slip rubber shoes, and a protective helmet to cover long hair.

　　9) 使用眼鏡和聽力保護裝置

　　9) Use safety goggles and hearing protection devices

　　10) 不要亂用絕緣電線不要通過絕緣電線移動電動工具或者猛拉使其脫離機器主體，使絕緣電線遠離熱源、油污和鋒利的邊緣。

　　10) Do not misuse insulated wires. Do not use insulated wires to move power tools or forcefully pull them away from the machine body. Keep insulated wires away from heat sources, oil stains, and sharp edges.

　　11) 保護工作使用夾鉗固定住制造品，比用手更，可以空出雙手操作工具。

　　11) Using clamps to secure manufactured products for protection work is safer than using hands and allows for hands-free operation of tools.

　　12) 不要伸越工具工作時，保持適當?shù)淖藙?shì)，必須站穩。

　　12) When working with tools, maintain an appropriate posture and stand firmly.

　　13) 仔細保養工具保持工具清潔，確保工具更好、更的性能，按照說明書定期進行保養，定期檢查工具， 電線，如果損壞應及時更換。

　　13) Carefully maintain tools to keep them clean and ensure better and safer performance. Follow the instructions for regular maintenance, inspect tools and wires regularly, and replace them promptly if damaged.

　　14) 電源脫離當工具不使用、技術維護、修理、保養和更換配件，請斷開電源。

　　14) When the power supply is disconnected and the tool is not in use, for technical maintenance, repair, maintenance, or replacement of parts, please disconnect the power supply.

　　15) 取下調整用工具及扳手在開動機器前，需檢查調節扳手是否已脫離工具。

　　15) Before starting the machine, it is necessary to check whether the adjusting wrench has been detached from the tool.

　　16) 使用戶外延長線在戶外使用工具，需使用戶外專用延長線路。

　　16) When using outdoor extension cords for tools, it is necessary to use outdoor dedicated extension cords.

　　17) 保持清醒專心一致注意正在進行的工作，當你在疲倦或在酒精、藥物作用下的時候不要操作工具。

　　17) Stay awake, focused, and attentive to the work in progress. Do not operate tools when you are tired or under the influence of alcohol or drugs.

　　18) 檢查損壞部件再次使用工具之前，仔細檢查工具是否損壞，若有應判斷其是否將影響到工具的正確操作，檢查所有可移動的部分是否在正確的位置，固定的部分是否緊固等，檢查可能影響正常操作的部件，有損壞部件應反廠或請授權服務中心修理或替換，不可在開關失靈的情況下使用工具。

　　18) Before using the tool again, carefully check whether the damaged parts are damaged. If so, determine whether it will affect the correct operation of the tool. Check whether all movable parts are in the correct position, whether the fixed parts are fastened, etc. Check for parts that may affect normal operation. If there are damaged parts, they should be returned to the factory or authorized service centers for repair or replacement. Do not use the tool when the switch is malfunctioning.

　　19) 警告！使用本操作說明書以外的附件或部件容易造成傷害事故。

　　19) Warning! Using accessories or components outside of this operating manual can easily cause injury accidents.

　　20) 請有資格的人員修理工具本電動工具符合相關要求，務必請人員使用原裝部件進行維修，并使用原廠的配件，否則可能會給用戶帶來嚴重傷害。

　　20) Qualified personnel are required to repair this electric tool to ensure compliance with relevant safety requirements. Professional personnel must use original parts and factory accessories for repairs, otherwise it may cause serious harm to the user.

　　本文由 扭剪螺栓專用扳手  友情奉獻.更多有關的知識請點擊 http:///    真誠的態度.為您提供為的服務.更多有關的知識我們將會陸續向大家奉獻.敬請期待.

　　This article is a friendly contribution from the special wrench for twisted shear bolts. For more related knowledge, please click http:/// Sincere attitude. We provide you with comprehensive services. We will gradually contribute more relevant knowledge to everyone. Please stay tuned