1.沖擊電動扳手：主要是初緊螺栓的，它的操作簡單，就是對準螺栓扳動電源開關就行。
1. Impact electric wrench: mainly used for initial tightening of bolts, its operation is simple, which is to align the bolt and pull the power switch.
2.電動扭剪扳手：主要是終緊扭剪型高強螺栓的，它的使用就是對準螺栓扳動電源開關，直到把扭剪型高強螺栓的梅花頭打斷為止。
2. Electric shear wrench: mainly used for final tightening of shear type high-strength bolts. Its use is to align the bolt and pull the power switch until the plum blossom head of the shear type high-strength bolt is broken.
3.電動定扭矩扳手：既可初緊又可終緊，它的使用是先調節扭矩，再緊固螺栓。
3. Electric fixed torque wrench: It can be used for both initial and final tightening. Its use involves adjusting the torque first and then tightening the bolts.
4.電動轉角扳手：主要也屬于定扭矩扳手的一種，它的使用是先調節旋轉度數，再緊固螺栓。
4. Electric angle wrench: It mainly belongs to a type of fixed torque wrench, which is used to adjust the rotation degree first and then tighten the bolt.
5.電動角向扳手：是一種專門緊固鋼架夾角部位螺栓的電動扳手，它的使用和電動扭剪扳手原理一樣。
5. Electric angle wrench: It is a type of electric wrench specifically used to tighten bolts at the angle of the steel frame, and its use is the same as that of an electric torsion wrench.
感謝您的閱讀,本文的精彩內容來自:
扭剪電動扳手我們會有更多的精彩內容繼續為您呈現,詳情請點擊：
http://Thank you for reading. The exciting content of this article comes from: Torsion Shear Electric Wrench. We will continue to present more exciting content for you. For more details, please click on: http://
